Hinged Inspection Opening Kit For Side Access Of Your Fuselage
Four Latches To Keep It From Coming Open In Flight
Or
Inspection Opening Kit For Occasional Access
Screw Fastened For Easy Access
Both Fit The Small Area Right Behind The
Gear, And Right Behind The Wing Struts
Designed For The Zenith CH-701
Click On Pictures Below To View Larger
Kit Is Ready For You To Cut Opening And Rivet Into Place
Click On Pictures To Make Them Full Size For A Better View
Surface Mount With Back Plate
Front and Rear of Hinged Quick Access Panel
Uses Your Pulled Rivets For Mounting
)
)
Flush Mount
Front And Rear Of Screw & Nutplate Access Panel
Includes SS Screws and Flush 3/32 Rivets For Mounting
)
)
Below, Pictures and Install By Dan Stanton - N2268S
Viking/Honda Engine Upgrade With Access Panel Install
|
Location Marked Pilot Holes Are Drilled - Ready To Cut Out Skin |
|
|
|
Fitting The Back Plate To Drill The Rivet Holes |
|
|
|
Ready To Put The Flush Rivets In Place. The Door Finished On The Airplane |
|
|
)
)
)
)
)
)
Below, Pictures and Install By Dennis Hall - N701NH
Makes easy access to the fuel filter
All parts are CNC cut for repeatable accuracy & close tolerance from
6061 T6 aluminum
)
)
Here Is Where It Goes Back Plate Is Used As Opening Template
Overall Size Is About 11" X 12"
)
)
Front Plate Held In Place For Trial Holes Are Drilled - Ready To Cut Skin
Opening Size Is About 8" X 8"
)
)
Using Knife To Cut Opening Opening Has Now Been Cut
Install Only Takes About An Hour From Start To Finish
)
)
All Parts In Place Ready To Rivet Door Swings Open
Uses Standard Zenith Pulled Rivets For Install
All Rivets In Place, Project Is Finished
The side opening kit can be installed on either side of the airplane. Makes a great access opening to just check on the control system without taking off the bottom panel. Works great to give access to your fuel filter, as shown here on N701NH
Get With Your Friends And Buy Several Kits At A Time.
Save $$$$$ by Quantity Buying.
Multiple Kits Shipped To A Single Address Only
KIT PRICING
Single Kit: $ 49.95 (PN-SOK-1)
Two (2) Kits: $ 92.95 (PN-SOK-2)
Four (4) Kits: $ 176.95 (PN-SOK-4)
NOTE: Please Indicate Right or Left Side Installation
Also Specify Hinged or Screw Fasterner Type
And Skin Thickness For Screw Fasterner Type Only
Shipping & Handling
$6.95 Per Order
By USPS
Please inquire for out of country additional shipping costs.
ORDER FROM:
George Race
3865 Gibbs Rd.
Albion, MI 49224
WITH YOUR ORDER:
1. Send Cash, Check, or Money Order with order.
2. Please Include PN Number Listed Above With Order
3. Please include your Name and Mailing Address & Zip
4. You can pay with PayPal to my eMail address: mykitairplane@mrrace.com
5.
If you use PayPal send me an eMail with your order details.
Don't Forget To Add Postage To Your Final Order Price
Click Here -- To Ask Question Or
Leave Comment