 |
Click Here For Details
|
If you are building an Experimental Aircraft, this is a program you need to have. Designed by an airplane builder for airplane builders, this program keeps track of everything necessary for you to get your final FAA approval prior to that most important first flight.
(For XP & Vista Only)
|
 |
Click Here For Details |
If you are building, or considering building A Zenith CH-701 Experimental Aircraft, you need to purchase this DVD. Containing over 2000 high detail pictures, you can see every detail in the building of N73EX. Dual sticks, electric flaps, a center console, and a lot of other custom features. Also included are most of the documents you need for your registration and flight.
|
 |
Click Here For Details |
Now available, a new series of Instrument Panel Bezels, Adaptors, & Covers. CNC Machined, the Bezels can be used to cover up any rough instrument openings in your home made panel, as well as used as a template to cut your panel openings. Machined from 6061-T6 they are ready for you to powder coat or paint to match your aircraft panel.
|
 |
Click Here For Details |
If you are building a Zenith Airplane you are going to need to build 2 or 3 inspection openings into each wing. These will give you access to the Wing Tip Strobe Unit, the Fuel Gauge Sender, and the Fuel Tank Outlet. This Inspection Opening Kit will save you hous of building time. Available with .016 & .025 Cover Plate to match your skin thickness.
|
 |
Click Here For Details |
Now available, tie down rings for your Experimental Airplane. CNC Machined, this pair of tie down rings are very easy to install. Just cut a slot in the bottom wing skin, along the flat side of a rib and rivet into place. The ring opening hangs below the wing skin and look very professional. Makes it very easy to tie down.
|
 |
Click Here For Details |
A great looking Data Plate, just what you need for that custom finished look on your airplane. CNC Milled into a piece of .040 6061 T6 Aluminum, this Data Plate puts the finishing touch on your years of work. The CNC Milling and the Zenith Logo add a special touch that I think looks much nicer than using those little alpha numeric punches or using an engraving tool. |
 |
Click Here For Details |
No matter how hard you try, it is very difficult to get the openings in the wing for the Fuel Drain to come out the size you want it and have it perfectly centered as well. This Fuel Drain Trim Plate is just what you need to add that finished look to your Fuel Drain. Just glue them in place and your have a perfect looking opening with the Fuel Drain peeking through. |
 |
Click Here For Details |
Download A free POH for the Zenith CH-701
Engine used is a Jabiur 2200a, Prop is a Wood Sensenich 62"
The POH is a Word Document and is about 725K in size.
It can be easily modified to fit your engine, prop, and aircraft features.
|
 |
Click Here For Details |
Everybody builds a panel differently. Follow along in pictures as I build a custom panel for a Zenith CH701. If you need help designing and building your panel, I can provide as little or as much help as you need. I do not supply any insturments or panel components, but can do much of the grunt work of getting your panel ready for mounting of your components. |
 |
Click Here For Details |
If you are building an Experimental Aircraft that will need Elevator and Aileron electric trim, this control box is going to be something you will need to build and install. Using Ray Allen components, I can provide a "ready to go" package that only needs mounting in your aiplane and a simple hook up to be ready for operation. |
